NO - the intake ports are unique to the EFI only - what I did was make an adapter plate (1" thick alum) to bolt the holly bolt pattern to the intake. Worked perfectly - the raised intake & exhaust ports make that head and intake combo decent - despite the small size. I can take a pic of it. Dave
Yes , but you would have to change the intake manifold also
Intake Manifold torque is 30 ft/lbs on the 460 Ford V8Valve cover is 10 ft/lbs
Spark plug wires incorrectly connected or it is way out of time.
NO - the intake ports are unique to the EFI only - what I did was make an adapter plate (1" thick alum) to bolt the holly bolt pattern to the intake. Worked perfectly - the raised intake & exhaust ports make that head and intake combo decent - despite the small size. I can take a pic of it. Dave
what are the carb settings fro a 1988 f350 pickup
the valve on intake port side and exhause valve on exhaust manifold side.
AnswerThis is the 2nd year that Ford put the Fuel Injection on the 460 Engine. All you have to do is look for the Fuel Injectors on the Intake Manifold. There are 4 of them on each side.
If you look on the intake manifold of any engine you will find the firing order.
Behind the intake manifold in the center of the engine block.
The map sensor is located on the intake manifold of a 1994 Ford. It could also be located on the plenum by the throttle body.
it is on the back of the intake connected to a metal pipe
No. Intake ports will not match up.