yes you can but you got to make sure you don't pinch the rubber booster or get the wrong size for you brake system. I say the level of expertise is medium. If it is too big you will have a brake peddle that will stick to the floor and you will manually have to pull it back up. If it is too small you wont have the braking power you need.
If you are wondering whether or not brake booster repair is something easily done by an amateur because you want to fix it yourself, then the answer would be no. Take it in to get it fixed.
I would say a power brake booster or a brake booster would be the same.
I wouldn't repair any brake parts unless I am a professional mechanic. Brake boosters can be very difficult to replace and if they are not replaced properly, it can cause a serious accident.
Begin by removing the brake lines from your 1995 GMC Jimmy brake booster. Remove the brake booster retaining bolts. Reverse the process to install your new brake booster.
2006 Toyota brake booster
The brake booster is part of the power brake system.
The power brake booster of a vehicle is replaced by removing the fluid reservoir, unbolting the booster from the firewall, and disconnecting it from the brake pedal. A new booster can then be connected and bolted into place.
The 1989 Lincoln Continental brake booster is located on the firewall in the engine compartment. The brake booster will be on the drivers side of the firewall.
You can fix the brake booster switch in your 1991 Jaguar by replacing the brake booster switch. In most cases when the brake booster switch does not function properly the only way to fix it is to replace it.
brake booster vacuum leak,or bad brake booster.
If you have a power brake booster then there will be a vaccum line that runs to the brake booster on the firewall from the carburator. Check the booster for holes and broken fittings or buy a new booster. if no brake booster then brakes shouldn't affect vaccum
how do you remove thekeeper that holds booster rod on brake pedal