yes you can
Check the current settingscat /etc/fstab
LABEL=/ / ext3 defaults 1 1
LABEL=/u00 /u00 ext3 defaults 1 2
LABEL=/u01 /u01 ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
LABEL=SWAP-sdb1 swap swap defaults 0 0
Switch off the swap deviceswapoff -a
Recreate the swap partition with friskfdisk /dev/sdb
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Delete the old swap partitionCommand (m for help): d
Selected partition 1
Command (m for help): d
No partition is defined yet!
Select the partition typeCommand (m for help): t
Selected partition 1
Hex code (type L to list codes): l
0 Empty 1e Hidden W95 FAT1 80 Old Minix bf Solaris
1 FAT12 24 NEC DOS 81 Minix / old Lin c1 DRDOS/sec (FAT-
2 XENIX root 39 Plan 9 82 Linux swap / So c4 DRDOS/sec (FAT-
3 XENIX usr 3c PartitionMagic 83 Linux c6 DRDOS/sec (FAT-
4 FAT16 <32M 40 Venix 80286 84 OS/2 hidden C: c7 Syrinx
5 Extended 41 PPC PReP Boot 85 Linux extended da Non-FS data
6 FAT16 42 SFS 86 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS 4d QNX4.x 87 NTFS volume set de Dell Utility
8 AIX 4e QNX4.x 2nd part 88 Linux plaintext df BootIt
9 AIX bootable 4f QNX4.x 3rd part 8e Linux LVM e1 DOS access
a OS/2 Boot Manag 50 OnTrack DM 93 Amoeba E3 DOS R/O
b W95 FAT32 51 OnTrack DM6 Aux 94 Amoeba BBT e4 SpeedStor
c W95 FAT32 (LBA) 52 CP/M 9f BSD/OS eb BeOS fs
e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi ee EFI GPT
f W95 Ext'd (LBA) 54 OnTrackDM6 a5 FreeBSD ef EFI (FAT-12/16/
10 OPUS 55 EZ-Drive a6 OpenBSD f0 Linux/PA-RISC b
11 Hidden FAT12 56 Golden Bow a7 NeXTSTEP f1 SpeedStor
12 Compaq diagnost 5c Priam Edisk a8 Darwin UFS f4 SpeedStor
14 Hidden FAT16 3 61 SpeedStor a9 NetBSD f2 DOS secondary
16 Hidden FAT16 63 GNU HURD or Sys ab Darwin boot fb VMware VMFS
17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT
Hex code (type L to list codes): 82
Changed system type of partition 1 to 82 (Linux swap / Solaris)
Create a new partition. I'll use the full size of the disk /dev/sdbCommand (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-522, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-522, default 522):
Using default value 522
Write the changes to disk and exitCommand (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Now it's time to create a new swap filesystem with mkswap. Because I use labels in fstab, I create the new filesystem again with a label.mkswap /dev/sdb1 -L SWAP-sdb1
Enable the swap device againswapon -a
Display the new swap infoswapon -s
Filename Type Size Used Priority
/dev/sdb1 partition 4192924 34324 -1
A ISO image for Linux Mint nowadays goes up to about upwards of 1 gigabyte or so, and when installed, depends on how big the partition(s) you have allocated for it.
If you have installed mint to a fresh partition with no other OS on that partition then removing mint is really easy. It applies to any other GNU/Linux. If you are using Windows, then just format the mint partition and boot into the recovery console (R) using the Windows boot cd. type: fixmbr at the recovery console and when it asks for conformation type y.
Try unmaximizing and then resizing. Try hitting Alt+F7 and move the window until you can resize. To resize move mouse to corner or edge of window until the cursor changes and then click and drag.
You can set up file sharing between windows 7 and Linux mint 16 by simply installing the Ext2 Installable File System on windows which allow windows to read and write into the Linux file system.
Linux Mint was created on 2006-08-27.
You can download Linux Mint here: www.linuxmint.com/download.php
The latest release of Linux Mint can be downloaded from a number of online sites. The official Linux Mint website is the most reputable source for this download.
Download the ISO images from Linux Mint's website, and burn it to a DVD or a flash drive and boot from it. Once it boots in a live session, on the desktop there is a icon named "Install Linux Mint" and click on it. Then follow the instructions and you'll be on your way to install Linux Mint.
Ubuntu-based distributions are amongst the easiest Linux distribution families to install, which includes Linux Mint. Depending on your hardware configuration, you will have to look up your hardware specifications, in particular if it uses BIOS/CSM/Legacy Mode or UEFI. From there on, the onscreen instructions should help in general - though do take note of the blockdevice names as assigned by udev for your storage drives as you do not want to overwrite your personal data by accident.
Linux, linux mint is a pretty popular but not as windows but it better than window. It has more features, more security, it is an anti virus system no virus has been invented or has or will for linux mint and linux
1. download and burn the setup media2. meanwhile backup your home directory (including the hidden folders)3. install Linux mint4. extract the backup to your home folderFurther to above:When installing Linux Mint from the CD (iso), the Ubuntu already on the hard-drive will be automatically detected. You will be asked whether to install Mint alongside Ubuntu, so creating a dual-boot, or use the entire hard-drive for Mint alone, so wiping Ubuntu off the hard-drive.If you do create a dual-boot system, on booting the computer you will have the choice on using either Mint or Ubuntu.
You can by using gparted. At a terminal prompt type sudo gparted and your partitions will be shown, from where alterations can be made. You need to use sudo gparted to become superuser. If gparted is not installed, the terminal will say so and tell you how to install gparted. Warning: back up important files first to an external flash or hard-drive in case things go wrong. And have an upto date operating system on a CD or DVD to reinstall the OS should things go seriously wrong (just in case!).Further warning: GParted can't usually do anything at all to a partition if it is in use. This is why there are GParted live media.