i have replaced my clutch to 10.5 diemter ,can i re use the morso flywheel/clutch bolts
55ftlbs
pressure plate to flywheel bolts - 15 to 24
1997 S10 4 cylinder engine pressure plate to flywheel bolts, 33 ft lbs.1997 S10 V6 engine pressure plate to flywheel bolts, 29 ft lbs.
24 Foot Lbs on clutch cover bolts. 85 Foot Lbs on flywheel bolts. Use lock tight on both set of bolts.
If the bolts are 3/8-16, the torque would be 50 ft/lbs. If 7/16, 65 ft/lbs.
35 ft. lbs. on the intake, and 70 ft. lbs. on the flywheel.
what is the torque for the bolts on the clutch springs for a trx 90/>
You have to pull the transmission. then it's just 3 bolts/nuts through flywheel.
Torque converter bolts No. Fly-wheel bolts YES.
The flywheel just bolts up, remove the bolt.
The torque specs for a 235 Chevy include main cap bolts of 100 - 110. Its bellhousing bolts are 45 - 55, flywheel bolts of 50 - 65, and rod nuts of 35 - 45.
Usually with bolts.