You have to pull the transmission. then it's just 3 bolts/nuts through flywheel.
how to drai torque converter on 1999 chevy blazer
You need to remove the lower transmission inspection cover.
big job you have to remove trans or at least back it out enough to remove torque converter cause its behind it
what are the torque specks for 85 Chevy s10 with a 2.5 engine
No drain plug. Filter is located inside the transmission pan on the bottom of the tranny.
The front seal on your automatic transmission would be between the torque converter and the front pump of the transmission. The transmission would have to be removed along with the torque converter to replace the seal.
Which engine is in it ? First disconnect battery remove torque converter cover if it is an auto trans remove starter bolts position so you can remove rest of wires stand starter vertical rotate and let it com out the bottom
33 ft lbs of torque
It is between the torque converter and the front pump of the transmission. The transmission or engine has to be removed to gain access to the front transmission seal.
The catalytic converter is found in the exhaust system between the engine and the muffler.
After the catalytic converter.
In the exhaust system, before the muffler.