You need to remove the lower transmission inspection cover.
Remove the starter and remove the protector places behind the started
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
The 3.1 was a V6
What are the torque specs for a 1996 Chevy cavalier 2.2l
The torque converter is between the engine and transmission
Yes. If you are going to remove the transmission to rebuild it, you may as well go ahead and replace the torque converter.. not to mention all the seals anywhere near that area.
46 foot pounds on short bolts 54 foot pounds on long bolts + 90 degees
The 1996 Chevrolet Cavalier 2.2 liter engine had bolt torque specifications are 120 pounds. The head bolts should be torqued at 40 pound intervals.
Four-speed 4L60-E electronically controlled unit, with a Torque Converter Clutch (TCC)
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
You will have to remove the transmission and then pull the converter out of the trans.
It is inside the transmission, on the valve body.