Remove the starter and remove the protector places behind the started
how to drai torque converter on 1999 chevy blazer
Yes. If you are going to remove the transmission to rebuild it, you may as well go ahead and replace the torque converter.. not to mention all the seals anywhere near that area.
It's inside the transmission (between the engine and the gears).
It's a good idea.
You need to separate engine and transmission. Then torque converter just pulls of tranny.
big job you have to remove trans or at least back it out enough to remove torque converter cause its behind it
suspend the car from the frame (UNDER THE CABIN ) HAVE THE AXLES FREE . REMOVE TORQUE CONVERTER COVER AND THERE IT COMES THE OIL PAN
Torque converters cannot be serviced as they are welded together, the only way to fix them is to remove the transmission and torque converter and replace the torque converter.
Remove the driveshaft from the back of your Chevy transmission. Remove the transmission mount retaining bolts. Remove the retaining bolts from the Bell housing. The transmission can then slide backwards. Don't forget to unbolt the torque converter from the flex-plate and remove the torque converter with the transmission.
How can I tell if a 1995 torque converter is going bad the tranny slips and stops when it warms up.
The front seal on your automatic transmission would be between the torque converter and the front pump of the transmission. The transmission would have to be removed along with the torque converter to replace the seal.
You need to remove the lower transmission inspection cover.