0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can a 9v dc motor produce 9v when it is used as an alternator?
A: No problem but don't expect the power to increase
Can you use a 9v dc 1000ma adaptor for a device that has 'power input' of 15v dc 800ma?
A: Disregarding the fact of different voltages there is the power to be concerned 9v x 1A = 9W, 15V X .8 = 12W. THE DEVICE WILL BE UNDER POWER.
Can you convert a 9v battery snap to a dc power supply?
You would need a 9V dc supply. The potential current output of you supply myst be greater than or equal to the current draw of the pedal. (100ma load on a 150ma supply: fine. 150ma load on a 100ma supply: bad.) With these conditions met you can just get another 9V snap and wire it to your supply. Remember, as you are connecting two snaps together, the polarity of the snap for your supply will be reversed. (Red is - and black is +) CHECK YOUR WORK! If you mix up the polarity, you could smoke your pedal. You can also make your own regulator with a LM317 voltage regulator from a higher supply. This will only work with another low voltage DC supply with a voltage output higher than 9V. It will not boost the voltage and will not work with line voltages. It is a common IC and many manufacturers make them. Check your pedal. Most of them have DC in jacks so you don't need to hook to the battery clip.
Which compnent can you use to convert a 9V dc to an ac in a circuit?
The device that changes d.c. into a.c. is called an 'inverter'. Whether you can get one for 9 V is another question!
What happens if i use a 12v Dc in a device that requires 9v DC And can it be repaired?
Not a good idea. It will raise the current that could burn out components. To repair you would need to determine what was burned out and how easy it would be to replace.
Can a 6 volt adapter be substituted for a 9 volt adapter?
No, of course not. The 6v adapter only produces 6v, while the load expects 9v.
What are uses of bidirectional dc motor?
6V dc motor
Will a 9v DC adapter damage a device that requires a 6v DC adapter?
Yes, the manufacturer specifies what the working voltage of a device will be and that voltage has to be adhered to.
If your input is 6V and output is 12V then which device you use?
using dc-dc converter
Can a 9v dc motor produce 9v when it is used as an alternator?
A: No problem but don't expect the power to increase
Can you plug 9V dc to 220v?
It is certainly unsafe.
Can I use a battery charger that is rated at 6V DC 1000 mA to replace one that was 6V DC 100mA or will this damage the battery?
No you should not do that. It will damage the battery and the battery will explode.
Can you use 6V DC 1000mA adapter in place of 6V DC 600mA adapter?
Yes you can. Given the fact you're talking about milliamps - the slight increase in amps will have no detrimental effect.
For a device requiring DC 6V 1000mA will a DC adapter output 9V 1000mA also work for this device?
A device which requires 1000mA at 9 volts in order to operate will not work from an output of 500mA. This output is only half the power requirement of the device.
What the conclusion that can take in multiple dc power supply?
conclusion of dc power supply 9V
Can i use 9v dc with 12v dc?
No. 9 v is only 75% of 12 v.
Would a device requiring dc 9V 1000mA output work with an adapter with dc 5V 3A in output?
No. Usually it's a -/+ 10% difference. So, a 9v would need at least 7.2 volts or more
