No because dust sticks to grease
"Greased Lightning." When Travolta is lifted by the chain to get the motor, he isn't wearing a jacket. However, when he comes down with the motor, he has has T-bird jacket on. He had thrown it off earlier.
If you remove the wiper motor cap you will see where the arm connects to the motor. If you spray electrical lube or white lithium grease on and under the arm and turn them on and off a few times so that the grease works itself in they will stop sticking ad rest where they are supposed to when in the off position.
I HAVE A 15KW 50Hz 400V VEM MOTOR , I WANT TO RENEWAL THE GREASE
by lubricating it by grease
Chain.
Typically it is not the motor, but the window regulator that has failed. In any event, the process is the same for all four doors (Aproximately) There is a comprehensive process to be located at www.lincolnsonline.com. Pictures, text, and all. I would add tht after replacing the nylon parts in the regulator, you pack it with white lithium grease, grease the cable, and grease all contact surfaces where the cable travels on the regulator. Had to do this to all 4 windows on my '90 towncar. Let me know if this helps Good luck avtel@cswnet.com
The k24t motor has a chain. That is the 2.4 litre, 4 cylinder motor. From what I remember - The V6 is also a chain.
buy a cheap bike then buy a good chain saw then take the chain saw apart then stay with the motor and get the chain of the bike and conect it to the motor then put gas in the motor then have fun.JUST BE CAREful
it has a timing chain
No they do not require you mess with them when new.
depends on what motor it is. what size is your motor?
The 1998 Ford 5.4 Triton motor has a timing chain on it. The timing chain kits cost around $70 each.