0
The MH ballast will not have the ignitor required to power up the HPS bulb. I have 1000w ballast that can be switched between HPS and MH with a singe switch just by disabling the ignitor for the MH.
I would look into conversion bulbs, or else check out this site for $20 150w HPS ballast with bulb.
http://www.e-conolight.com/Product/EProductDetail.asp?ProductFamilyID=7&FGNumber=E-MT6H151G
If it doesnt appear, sellect vapor tights, then the 150hps.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Can you use a 100 watt metal halide bulb in a 150 watt lamp?
Not recommended. It would work but shorten lamp life and may cause risk of fire. However, if you just wanted to check a lamp was capable of striking it would be ok for a few minutes. I've done the opposite in the past and used a 150w lamp with a 100w ballast. Works, but not good for any of the components, including lamp.
When you need to use metal halide conversion bulb?
When you want to use a MH bulb in an HPS ballast you must use a conversion bulb. It must be the same wattage as the HPS bulb
Can you use a 400W high pressure sodium bulb in a metal halide ballast?
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
Can you use a hps bulb in a metal halide fixture?
In most cases a cfl bulb can be replaced with an incandescent bulb as long as the base matches. for an example: if a cfl bulb has a GU24 base an incandescent bulb will not work! Also, ensure the wattage of the bulb does not exceed manufacturers rating.
How much wattage will the ballast and a 150 watt hps bulb use?
About 1.66 amps at 120 volts Ballasts have stickers on them that tell you the exact amps per the voltage that you are running
Can a 400 watt high pressure sodium bulb be used in a 400 watt metal halide ballast?
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
How much wattage does a 250w HPS bulb use?
hps light averages 125 lumens, therefore, a 150 watt hps light is about 18,750 lumens.
Can you use a 70 watt high pressure sodium bulb in a 150 watt ballast?
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
Can you use a 70 watt high pressure sodium bulb in a 100 watt ballast?
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Can you use a 100 watt HPS bulb in a 70 watt hps fixture?
In general no, because the extra heat produced would make it a fire hazard.
Can you use 250W metal halide bulb in a 1000W metal halide ballast?
No. The lamp has to match the ballast. The lamp will not ignite if the wrong ballast is used.
Can you use a 65 watt fluorescent bulb in a metal halide light fixture?
No, the ballast's output is not matched to operate a fluorescent bulb.
