answersLogoWhite

0


Best Answer

Quite simply no. This is because this would leave you with only the female end of the adapter. I would just get a female to male adapter.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you use a 15 pin vga male to female adapter as a female to male adapter?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Will the IEEE-1394 Firewire Adaptor, 6 Pin Female / 4 Pin Male work for my Dell notebook?

Any Firewire adapter will work great with a dell notebook, as they all have a standard firewire outlet or can use an adapter card.


Join threaded copper pipe?

By use of male or female, teflon paste or tape or leak block and then use A COPPER X MALE OR COPPER X fEMALE ADAPTER


Can you use toslink HDTV connection to computer speakers?

Yes...get a toslink (male) to a 3.5 mm (female) adapter. Easy as pie.


How do you connect 2 inch PVC to 2 inch copper?

You can use compression fittings that will fit PVC on one side and copper on the other. You will need to know the size and type of pipes you are connecting.Copper x Male adapter Or Copper x Female adapter and connect to a PVC x M or Female connector...... compression fittings are not allowed in decent codes.


What does a parallel cable look like?

There are two types, a 25 pin male to 25 pin female, and the most common, 25 pin male to a Centronix, which is what printers use. There are 25 pin cables that is not are not printer cables, but they are very uncommon. Almost all the time when someone refers to a parallel cable they are referring to a printer cable, which is a 25-pin to Centronix cable.


How can you transform stereo phono outputs to balanced XLR inputs?

Radio Shack carries a "2 into 1" adapter just for this problem. The two stereo leads will have a male plug. The adapter will use two females to this side. The single imput lead from the adapter will be male and plug directly into the mono-imput on your device. That imput will be female.


What is a 6.3mm plug adapter?

This adapter is also called a TRS adapter,phone jack adapter or a 1/4" adapter among many other names. The 6.3mm jack, originally called the TRS connector was invented for use in telephone switchboards in the 20th century and is still widely used in its original ¼″ (exactly 6.35 mm) size. An adapter would connect another type of plug to the TRS plug (male or female depending on the situation.


How do you remove pivot pin in a steering column?

If it has a tapped hole in the center you can use a puller or with the proper adapter use a slide hammer to tap it out.


How do you know hurricanes are male or female?

Hurricanes aren't male or female, those are just names they use to refer to them.


Do they use male names to name hurricanes?

they use both male and female names


What to use to get honry?

it depends if your male or female


When i use a 6pin adapter do i need to put 2 4pin cables into it or just one as the adapters look like they have 2 4 pins?

You need to put two 4-pin cables into the adapter as that provides the additional power that is required to drive a single 6-pin PCIe connection.