hahahhahahahaha
class C
You use a thermocouple as the input to the amplifier circuit.
An audio power amplifier. An audio amplifier is designed to amplify frequencies between 15 Hz and 20 kHz. Any amplifier that is designed for this entire band of frequencies or any band of frequencies contained in the audio range is considered to be an audio amplifier. by charming syamu...
One can learn how to use a video distribution amplifier by reading the guides that come with these products. One can also watch video tutorials on YouTube.
ideally "line out" on the receiver to "audio in" on the amplifier, left and right... If there isn't a "line out" use the the "audio out" but keep the volume on the receiver relatively low to prevent overdriving the inputs on the amplifier.
Depends on what your definition of "receiver" is, but most of the time - to the amplifier. Consider: if the receiver is some form of a device that receives some signal, and then decodes it to audio, then the receiver will hook into the amplifier, which in turn will drive the speakers (so the speakers go to the amplifier) if, on the other hand, the receiver is a part of a wireless connection between the amplifier and speaker, then it really serves the role of a cable, so in essence you're again connecting the speakers to an amplifier (only using the receiver as an intermediary) You would have to specify your case.
hahahhahahahaha
No, because in a pure amplifier the radio part is always missing.
Is this sentence supposed to be question? Any superheterodyne receiver will have an IF amplifier. It doesn't matter whether TV or radio.
If it has auxiliary inputs, such as a line level input, then yes, it should be able to serve as an amplifier. Be warned though that it probably won't work well as a guitar / instrument amplifier.
class C
As a frequency receiver
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
radio frequency amplifier intermediate frequency( If strip) in a superheterodyne radio mixer /demodulator Audio amplifier
Exciter Input filter/amplifier Demodulator power amplifier audio processor
It depends on the specific models of each, but typically, Yes. Of course you will need a 12VDC power supply for the amplifier, though. You will also need a AV receiver with a preamp output. You cannot run speaker level outputs into the input of an amplifier.