0
Can you use the 3Bs borax bleach baking soda to maintain your pool?
Wiki User
∙ 12y ago
Yes, but there is more to it than simply dumping in borax and baking soda, and pouring in plain household bleach.
Essentially, you use bleach to maintain chlorine levels, borax as needed to lower the pH, baking soda to increase alkalinity (water's resistance to pH change). But you will still need stabilizer (for outdoor pools), an acid if your pH goes up, and calcium if you have an in ground concrete pool.
Plus, you MUST have a way to test your pool water accurately, and must be able to determine correct doses.
This method was developed at PoolSolutions.com in the 90's and has been popularized at PoolForum.com and at Troublefreepool.com. Full explanations are available at those sites, and you can post questions at PoolForum.com and TroublefreePool.com. Other sites where this method is sometimes advocated include PoolSpaForum.com, Havuz.org and GardenWeb.
In general, this method is NOT accepted by the pool industry, since it emphasizes buying generic basic chemicals, and avoiding pool store brands and additives.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can bleach baking soda and borax all be added at the same time to a 30000 pool?
Yes, but it's not generally a good idea. Both will tend to raise your pH. If your pH is too low, add the borax first, to get it to at least 7.0. Then you can add baking soda, if you need to increase your alkalinity. BUT, you should check your alkalinity after you raise your pH -- it will be higher, and you may not need the baking soda.
How do you clean the algae from your pool then maintain it?
sock it with chlorine, bleach
How do you make homemade pool algaecide?
A person can make a homemade pool algaecide by combining bleach, baking soda, and Borax. This shocks the pool and increases the pH if needed.
If you have an easy set above ground pool that holds 5455 gallons how much bleach and borax and baking do you use to open the pool?
It would be best to take a water sample to a pool store (such as Leslie's). They will run a computerized test which will tell you exactly which chemical to use and the proper order to place them in the pool. Be sure to tell them you have an above ground system.
How do you clean your 12 foot pool with baking soda?
No, that will not work. Use warm bleach and lots of it.
How much bleach should you add to a 23000 gallon pool?
Standard laundry bleach works fine in a pool. You should be sure to get plain bleach, not scented. The chemical in bleach is exactly the same as the chemical in pool chlorine but is generally about half the concentration. Most bleach is 6% sodium hypochlorite while chlorine for pools is 10-12%. So generally you would use about twice as much bleach as chlorine. The amount you add must be determined using a test kit to determine your current level of chlorine. An online calculator to use to determine the amount of bleach to add is at http://www.poolcalculator.com. As an example, if you have 0 ppm chlorine now and want to raise it to 4 ppm in a 23000 gallon pool, you would need to add 196 ounces (about 1-1/2 gallons) of bleach. For more help maintaining your pool using standard products like bleach, baking soda, and borax, search on "bbb method."
How much clorx bleach for 18000 gal pool?
how much chlorine do I put for a 1,718 gallon pool
Can you put bleach in a kitty pool?
Yes but you also need chlorine stabilizer (CYA) or the chlorine will be destroyed by sunlight in a very short time or you need to add the bleach in doses thoughout the day to maintain the chlorine level. Bleach is the same as liquid pool chlorine but at a lower concentration.
How do you raise pH level in pool?
You can use soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda. You can also use borax, sold as 20 Mule Team Borax. Sodium bicarbonate, sold as baking soda, Alkalinity Increaser or Alk Up, will raise pool pH levels, but not very efficiently.
Can i mix pool chlorine and bleach?
Bleach is unstabilized chlorine. It is just a weaker form of the chlorine you buy at the pool store.
How much borax do you use in your green pool?
Only use 20 Mule Team Borax without detergent. This raises your PH without raisig alkalinity. Try using the same amount you would with PH plus, and wait 2 to 4 hrs. and check your PH reading. If your alkalinity is low you can use baking soda to raise your alkalinity. Baking Soda raises PH and Alkalinity. Baking Soda has the same ingredients as Alkalinity plus, but half the price. Take a look at this web site for more information on Borax. http://www.poolsolutions.com/gd/borax_20mule.html TS
Should you use baking soda or soda ash to raise the ph level of your pool?
Use Soda Ash to increase the PH level. Baking soda can be used to maintain the alkalinity of the pool water. Just the opposite!!!! Baking Soda will increase or raise the alk. Soda Ash raises the pH. Muriatic Acid lowers pH. k
