Tools need are: 13mm wrench a set of oil filter pliers 5 quarts of oil Motorcraft FL820 oil filter drain bucket Crawl under the truck with your 13mm wrench, And oil filter pliers. Find the engine oil pan color of the pan is black. Remove the drain plug by turning the drain plug to the left. make sure you have a bucket under there that will be able to hold at least 5 quarts. Now look right beside the drain plug up higher to the top of the engine you will see the oil filter remove with your oil filter pliers turning it to the left. Let oil completely drain reinstall drain plug. and replace oil filter with new. Now open the hood remove the oil filter cap add 5 quarts of oil. start engine let run for 30 seconds check for any leaks under the vehicle check oil level buy checking the oil dip stick. if you cant find the oil dip stick you are a dip stick and should be changing you own oil.. close the hood making sure it firmly closed and your good to go!! have fun
5W-30 , according to the 2000 Ford Ranger Owner Guide
The oil drain plug on the 2000 Ford Ranger is on the rear of the oil pan. It is located under the vehicle near the center.
( 5 W - 30 ) according to the 2000 Ford Ranger owners manual
2000'ford ranger pickup
According to the 2000 Ford Ranger owners manual the 2.5 liter four cylinder engine takes ( 5W-30 engine oil )
Engine oil?? 5W30 synthetic is best.
5 W 30
According to the 2000 Ford Ranger Owner Guide : ( 5W-30 engine oil ) for the 2.5 liter four cylinder , 3.0 + 4.0 liter V6 engines
According to the owners manual , the 2000 Ford Ranger 3.0 L engine takes 4.5 quarts (4.3 liters) of engine oil WITH FILTER CHANGE
According to the 2000 Ford Ranger owners manual: ( 5W - 30 ) for your 2.5 L four cylinder engine
On the oil pan, bottom of engine.
It will be about 4.7 liters in a v8. This will be with changing the oil filter and if there is no oil already in the vehicle.