Then you need to check the wiring between the computer and the dash. Either the computer has failed, or there is a short in the wire.
Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.
To check engine light codes one would have to bring your vehicle to a mechanic who can use a computer to check the computer chip that regulates this function.
I you pulled a P0700 out of the engine computer it means that you need to check the transmission computer (tcm) for codes also.I you pulled a P0700 out of the engine computer it means that you need to check the transmission computer (tcm) for codes also.
The light could come on for a number of reasons. The vehivle would have to be hooked up to a scanner to determine the engine code or codes. After you determine the codes you can isolate and fix the probelem. If the check engine light is on there will be a computer code that will appear on the scanner.
yes, and what codes are you asking about "check engine" or anti lock radio codes?
No, old or pending malfunction codes are stored in the computer and can be recalled when the computer is accessed.
you can either purchase a computer programmer ($200-$350+) that will allow you to check and clear codes as well as adjust computer settings for maximum performance or take the vehicle to most auto parts stores that can check the codes for free.
P0700 is EATX code present.It simply means that the engine computer has noticed that the transmission computer has a dtc in it. This causes the Pcm (engine computer) to turn the check engine light on. You will need to have the TCM (trans computer) checked for codes to know what to diagnoseP0700 is EATX code present.It simply means that the engine computer has noticed that the transmission computer has a dtc in it. This causes the Pcm (engine computer) to turn the check engine light on. You will need to have the TCM (trans computer) checked for codes to know what to diagnose
Suggest you have it checked for trouble codes. The engine computer and airbag system should both have codes.
You need to check your engine. The computer has detected a problem with the engine management system and the light is letting you know that is has error codes stored.
Check the vacuum system on the car an at the transmission. If the car is computer controlled, check the computer codes for a possible problem.
In the computer. If check engine light is on you can get them by plugging a reader into port under dash,.