Replace the bulb.
Check bulb if other side front is working.
To change the front blinker bulb on your 1986 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
There is no such thing as blinker fluid, a blinker is a turn signal light. They do not require any fluid. Brake fluid goes in at the firewall in front of the driver there usually is a plastic top with a round metal thing behind it.
Burnt out lamp if maybe only the rear or front works and the other still works. If the whole side is out back and front, then it may be the switch. Could be the flasher unit too but doubtful if one side is working.
Remove the inner wheel well screws and this gives you access to the front turn signals on both the driver and passenger side. (It also is alot easier to turn the wheels in the opposite direction of which ever side you are working on cause it gives you a lot more working room).
when you flip your blinker on, a relay in the circuit is activated which turns the light on and off. also, the front blinker and rear blinker usually alternate in turning off and on, so when the back is on, the front will be off, and reverse.. that's why when a bulb is out, the clicking sound in the vehicle goes faster than when both are in working order.
The dash indicator goes out to let you know one of the external lamps are not working
need to replace my front lower running / blinker bulb how do i do it
it would be the bulb.
How do you change a front blinker bulb for a BMW X5 2001?
Driver side, front of the motor, to the back... 1,3,5,7Passenger side from front to back... 2,4,6,8
if the bad blinker is the small, rectangular one in the gray bumper, all you need to do is get a Phillip's head screwdriver, remove both screws from the front blinker, remove the orange plastic cover, and then the bulb actually pops out itself with a quick wiggle. easy as pie, and the replacement bulb is quite cheap as well.