1.75 pounds or 28 oz
The torque specs for a 2003 Chevy S10 4x4 wheel bearing is 28 ft. lbs. This is equal to 38 N.m.
Your best bet is to go to the Chevy dealer, and ask the customer service person if they would give you a print out of the wirning diagram that you would need. Most of the Chevy dealers are pretty good at helping you out.
Manic Compression was created on 1995-02-28.
The transmission will be the same because from 1982-1990 GM used the same transmission in the S10 Blazer and S10 Pickups from what i have been told is even though the engines are the same size the trans might not be interchangable with your 83 model. because im going through the same problem my 85 s10 needs a 700r4 ,but it want interchange with every model of 2.8 engines,so if you know the answer to this please let me know.
big job you have to remove trans or at least back it out enough to remove torque converter cause its behind it
My 1998 S10 2.2L standard 5 spd averaged 28 mpg.
I believe 89's and up have 28 spline axles.
I can't recall any Chevy using a 302. It was the classic Ford small block used in early Mustangs. Chevrolet did produce a small block 302 used exclusively in the 1967 - 1969 Camaro Z/28.
f ′c: concrete compressive strength at 28 days (compression is negative) fcu: concrete crushing strength (compression is negative)
For the 2012 Chevy Aveo the average MPG is 26.1 However, for the 2011 model it was 30.8 MPG. The older models average around 28/29 MPG. These numbers are based on any engine type and any body style.
yes....They did is came in the 69 Z-28 Camaro's they were hi performance engines and with little to nothing just screw driver adjustments they can put out 400-450hp