A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
Look above the license plate and find the bulb assembly, grasp the flat part turn it clockwise and pull it out, the bulb just pulls straight out.
I would check the fuses.
194 is the number bulb for nearly very GM product around that era.
their are 4 plastic nuts in the trunk that loosen the light assembly that the lights are in. Remove those and pull the assembly out and twist the connector for the license plate light to access the bulb.
License Plate Light Bulb Size: 6418
in back above liscense plate,there should be 2 screws undo these screws, and pull out assembly to change bulb.
there should be little screws that you screw out and they pop out and you twist the bulb to remove it
how do you change the light bulb over the license plate on 2000 eclipse
how to replace the license plate bulb on a 2004 Honda cr-v
AnswerThere are two screws for each bulb fixture. Get down on the ground and you'll see them at the tag light. They are 7mm screws. Unscrew them til loose. You don't have to take them off all the way. After unscrewing them, slide lighting fixture away from bumper, and twist the bulb to the left, and pull it out. The license plate light bulb size is 194. You will probably have to take off the license plate in order to reach the bulb fixtures.
How do I change the license plate bulb on a 1993 Lexus ES 300