There are lots of reasons for the check engine light to come on. Some models have the light come on when the odometer hits a certain mileage point for scheduled maintenance. Also, if there is a fault in the firing sequence, injectors, vacuum, or other processes, the light will come on. "Cleaned engine" is a little vague - did you spray it with engine cleaner? If you did, and you rinsed with water, check your electrical connections and dry them out. If you went deeper, and removed the injectors and cleaned them, etc. Check over everything you did. You may have inadvertently clogged an injector or the electrical connection is loose. Find a friend who has a diagnostic computer and hook it up. It may return the fault code you need or it may return no fault code and you can reset the light. You can find the diagnostic handhelds at auto parts stores now and it could be worth it. The garage will charge you to diagnose, fix and reset the light and that could cost more than the device.
To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on. To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on.
The check engine light does not come on for an oil change.
Check the oxygen detector.
Go to the Camry dealership they should know.
how to discontect the engine light on a 2001 toyota camery ?
The check engine light is reset with a scan tool after repairing the failure that caused the trouble codes.
The check engine light comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, a check engine light is lit when there is a problem in the emissions or somthing that is affecting the effectiveness of the emissions.
you just go and get it checked
You have to disconnect the battery for couple minutes.
You have to find the reason why it came on.
Check Auto Zone or Advance Auto, the codes are online.
Check engine light or required maintenance light. Procedure for resetting required maintenance light just answered. Check engine light requires an OBD II to determine problem and turn the light off.
ABS, check engine.
Have vehicle scanned to determine the problem
lift the bonnet hey presto
The Check Engine Light has nothing to do with oil changes. It is on because the ECU has detected a problem with the emissions system.
Disconnecting the battery cable for a few minutes will reset the check engine light. If the light comes back on you will have to get the issue fixed or it will keep coming on.
To reset the check engine light on a 1999 Toyota Camry LE V6, disconnect the positive battery cable for a few minutes. Then reconnect the battery. If the 'check engine' light is still on, then turn the key to on without starting the engine and pump the gas three times and turn the key off. Start the car and the light should be off.
use a code reader to check the problem and it will reset the light, but if you do not fix the problem the light will continue to come back on.
Just disconnect the battery for couple minutes.
One word answer: YES
how to reset oil timing on 1990 toyota
you will go to the toyota dearler it good pleace
Disconnect the negative battery cable for a couple of minutes, then reconnect. This will erase the codes in the computer that makes the CHECK ENGINE light come on. If everything is okay, the CHECK ENGINE will stay off. Tried exactly that advice on my 2001 Camry....and it worked like a charm!!!
It is reset with a OBD2 scan tool, after the repair of the system.