deb ser reemplazada cada 60.000 km como limite maximo
como encontrar las marcas de un sephia 1999
Its has a timing belt (2.0l 16 valve dual cam ) and a timing chain in rear of camshaft.
Where are the timing marks on a 1992 Toyota Paseo 16 efi 1.5 liter engine?
The timing marks, on your Mitsubishi engine, can be found on the front main pulley. The timing marks will be on the outside edge of the pulley.
The 1996 Geo Tracker 1.6 liter engine timing marks can be found on the outside of the main pulley. The timing marks will be scattered around the pulley.
when to chang timing belt on peugeot 407 hdi 1.6
Just really want to know the timing belt settings please?
Providing that you used a shop manuals info, everything should be working fine. However, if you did not set the timing marks to match before you removed the old belt (or even if it broke off) it won't start.Also, try reasing any trouble code from the computer, by disconeecting the neg bat terminal for like 10 secs. In reality you have not stated what made you replace the belt in the first place, understand.If it was that the belt broke off while driving, then I do hope you set the timing marks at the lower crankshaft and upper Camshaft. (there are marks for this). That's why its important to have the vehicles shop manual. Also, I hope you used a timing light to do the final touch. good luck.AnswerThe upper timing mark is really hard to see clean off the bearing housing behind the cam gear mark it with a whiteout pen or touchup paint then align the crank timing using the same method. As for your ground and resetting the ecu I hope you pulled ground before doing a timing belt>? Once you get the belt on turn the car over by hand twice min. Look and see if your timing marks align still. If they don't then pull the belt and do it again. It's easy to jump teeth.
remove the old one and install the new one
if you haven't removed the belt get a very sharp Stanley knife cut off half of the belt length wise fit new belt partially then removed the rest of old belt and ease the new one fully on then it doesn't matter what you're timing marks are if you have removed the belt though it depends whether it's 8 or 16 valve let me know
I'm having mine done today, at 110,000 kilometres. Recomended is 100,000 kilometres. Be prepareds for the expense roughly 700 dollars Australian for me.