Really depends more on the vehicle than the engine. On a medium or heavy duty truck, they're often on the lower radiator hose. On a pickup, they're typically on the bottom rear of the radiator.
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.
where the radiator drain on 2003 bettle
There should not be a coolant drain on the engine block. You are probably looking at a freeze plug which should NOT be removed. The freeze plugs where openings for the original production/casting of the engine block and are sealed.
Where is the drain for the coolant on the radiator of a 2002 Ford Explorer sport (v6). Thanks.
Remove the drain plug from the bottom of your 2002 Chevy Camaro radiator. Allow the coolant to drain out into a container. When all the coolant is drained out replace the drain plug to its original position. Fill the radiator with new coolant.
Drain radiator at bottom or rear of radiator
try on radiator..
If you have a plugged AC condensation drain, clear water will back up and end up on the passenger floor. If the heater core is leaking engine coolant you will have engine coolant end up on the passenger floor.
Low side of the radiator.
DO NOT FLUSH the coolant system on a northstar. Drain the coolant, replace with 50/50 Dexcool and fresh clean water, and you're good to go. Especially NEVER NEVER buy a "Coolant Flush" at a dealer or quicky-lube place. All you'll get is the previous sucker's engine gunk pumped in to your engine.
300 - 2500+ lbs./ft, depending on which MODEL of Cummins engine you're referring to.
To flush the coolant in a 2002 Toyota Echo you will need to drain it first. Flush with fresh water and then refill with coolant and distilled water.