call you local parts store. they are also sometimes very labour intensive to change
Some ball joints are pressed in and others are bolted in, it depends on your style ball joints.
Ball joints are in the front suspension, it is basically what the wheel assembly pivots on when you turn. Universal joints are on the ends of the drive shaft in a rear wheel drive vehicle. At the transmission and rear end. They give the drive line some flexibility. The same principal is in front wheel drive but are referred to as constant velocity joints, or CV joints.
usually you have to press, or pound with a hammer...if the joints are riveted in you need to break the rivets, perhaps with a chisel...on rare occasion the joints are not servicable and the whole control arm need to be replaced
The ball joints on your car, are the flexible joints that connect the suspension control arm to the steering knuckle (the part of your axle that actually holds the wheel and allows it to turn left-right, but not up-down. == == == ==
they screw out and the new ones screw in. The upper ones screw in but the lower ones bolt in.
The 2004 Chevy Malibu ball joints will cost approximately $45 each. Replacing the ball joints will require approximately 3 hours of labor.
When owning a car it is important to know how much replacement parts will cost. A 1992 Oldsmobile Royale brake and ball joints will cost between $15 and $60+.
It will cost approximately $180 to replace the ball joints on your Acura. The cost is dependent upon many different factors.
Cost on replacing ball joints on a 2001 Buick lesabre
$1200
When replacing parts of a car, it is important to know the general cost of the fixes. To replace the ball joints for a 2003 F150 pickup truck, it is going to cost a person $40-$60 to do it on their own.
the ball joints are not serviceable.
Your shoulder and hip are both ball and socket joints.
The 1998 Dodge Dakota has both upper and lower ball joints. OEM grade replacements are approximately 40-50$ per ball joint (as of August 2014). Labor to replace will depend on how many need replacement and time necessary. The changing of ball joints will require an alignment upon completion additionally. It is advisable to replace ball joints as pairs, when possible.
Some ball joints are pressed in and others are bolted in, it depends on your style ball joints.
Hip and shoulder are both Ball and Socket Joints
for my 99 its 1149 for all four