0
combution chamber in jet engine .
air and fuel mixer burned in combution chamber by using igniter, then burent fuel mixer having with high pressure and high temperature . stagnation enthalpy temperature increases due to combution fuel -air mixture.
thrust :thrust is forward force , push the engine : thrust is reducing then velocity increases., of flight .
bhanu chander, p.b college of engineering .aeronautical engineering -9092149838
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the hot section of a jet engine the compressor or the turbine?
the hottest point of the jet engine is the combustion chamber
What is the temperature inside the combustion chamber of a jet engine?
The temperature inside the combustion chamber of a jet engine is one of the hottest manufactured by man. It can run about 1400 degrees Celsius or 2552 degrees Fahrenheit.
What effect does volcanic ash have on jet engine?
Volcanic ash effects jet engines by clogging-up the engine. The plane travels at such a speed even minute particles like volcanic ash can eventually fill-up the combustion chamber and since there is no moving parts in a jet engine it can't get out of the chamber. The massive heat in the chamber turns the volcanic ash to glass because its 80% silica which eventually stops everything in the engine (Basically).
What is sucked into the front compressor in a jet engine?
Air. Air and heat are the basis of the jet. The reason for this is that in the combustion chamber compressed air is ignited. The air flow pushes this reaction out the back of the engine and this= thrust.
How many people would a jet fit in the 1900?
Frank Whittle, a British pilot, designed the first turbo jet engine in 1930. The first Whittle engine successfully flew in April, 1937. This engine featured a multistage compressor, and a combustion chamber, a single stage turbine and a nozzle. In 1900 there were no jet around to carry a bunch a people.
How does a jet engine create thrust?
There are a few different jet engines, but it basically needs bleed air and fuel. Air enters the engine where it is compressed and mixed with fuel. Next, the air/fuel is heated in a combustion chamber, then it is unleashed through the turbine as thrust.
What is louder a jet engine or a drill?
jet engine
Who was the inventor of the jet engine?
Frank Whittle was the invetor of the jet engine.
Where to buy a mini jet engine?
You can but a mini jet engine on ebay.
How does a pulse jet engine work?
A Pulse Jet is a type of jet that uses a pulse jet engine for propulsion. The jet engine works by using pulse combinations of combustion. This is called "resonant combustion". The engine requires very little moving parts.
What is the principle of turbojet?
A turbo jet is a jet engine that is used on planes that go faster than the speed of sound (768 mph). A turbojet starts by having compressor fans which compress the air that enters the engine, then that compressed air gets mixed with jet fuel in the combustion chamber which burns, then that burned air goes out of the combustion chamber and turns the turbines which takes some of the energy away from the exhaust. the turbines are attached to the compressor fans, so when the turbines spin, so do the compressor fans. I wish i could make a diagram! :(
Where is the jet engine from?
The Germans invented the first operational jet engine during WW2.
