Driver's side head front to rear is 1-3-5 cylinders.
The other head front to rear is 2-4-6 cylinders.
A stright 6 cylinder engine front to back is 123456 cylinders.
Sure, You will have to change everything,motor mounts,computer,wire harness, exhaust, etc...
If it is the 4 cylinder, 2.2. If it is a 6 cylinder, 4.3.
It could have, Just count the spark plugs. 4 plugs= 4 cylinder 6 plugs= 6 cylinder 8 plugs= 8 cylinder
almost 44 cubic inches per engine cylinder
That depends on which motor you have, 4 or 5 cylinder?
There is a pad, right in front of the drivers side cylinder head. These numbers will tell you ev erything about your motor.
No. You will have to get v-8 mounts.
you will need V8 motor mounts and a bigger radiator.
the fireing order is on the intake
Standing in the front of the engine, Right head front to rear are cylinders 1-3-5-7The left head front to back are cylinders 2-4-6-8
There is a pad, right in front of the drivers side cylinder head. On this pad, you will find a couple of letters, then a series of numbers. These numbers will tell you everything about your motor.
The 293 or 4.8 L is a V8