No - this is based off trying to look for a replacement light bulb for both the c1500 and k1500 - neither list a replacement bulb for "center high-mount brake light"
T-55
Worn brake pads can cause the brake light to blink on the dash in a 1993 GMC Sierra 1500. This can also be caused by a faulty light.
Why? Just reset it.
The brake light switch is either defective or out of adjustment if applicable.
Check the fuses, Check the bulbs, Check the brake light switch, In that order.
Yes it will.
1990 Chevrolet 1500 brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Some brake light switches are only adjustable once.
Underneath the 1995 Chevy 1500, the cables from the real wheels connect to the cable from the brake pedal. The connection has an adjustment bolt that when tightened will make the brakes tighter.
bad brake light switch
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.
2011 Dodge Ram 1500 brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).