Any quick closing valve such as a solenoid can cause hydraulic shock waves
To release air that cause water hammer
When a valve is closed quickly the flow of water is interupted causing a water hammer. A water hammer arrestor or air chamber can be used to absorb the hammer.
Sun or to much water or irrigation
Technically it is called "HUNTING" which means it is hunting to maintain the SET Pressure and it more like a chattering sound then hydraulic shock (water hammer)
Generally it is about 55 psi . The best way to set it is have a water pressure valve installed on the incoming water line to your house. Too much pressure can cause serious damage to appliances. Water hammer is a comon cause of too much pressure Any Questions e-mail jdroegem@comcast.net
sudden stopages of flow by the closure of a valve
The anti syphon valve works by only allowing water to flow in one direction. For irrigation purposes, it prevents water from the system from being siphoned back into the water supply line.
It's called water hammer. It's caused when a valve is sudden opened or closed. It's usually happens with fixtures that draw large amounts of water like washing machines. You can install water hammer arrestors near the fixtures that are causing the problems.They were not strapped properly when installed.Pipe isn't properly fastened to keep it from knocking. An anti-hammer arrester installed in cold water line should help eliminate knocking. The knocking caused by sudden burst of water pressure in line when a valve or faucet is opened.
some methord of irrigation for-conserving water
Irrigation.
It is called water hammer, caused by an air pocket in the waterpipe. You can purchase a Water Hammer Arrestor at a plumbing or hardware store.
it is fire