What's the gap on the spark plug on a 2001 Jaguar S type 3.0 or
No
Some don't have wires, the coils are mounted direct to the spark plugs. Some have a dual spark plug design where the plug mounted coil also sparks another spark plug on the other side of the engine. Removint these spark plug wires will still allow the engine to run but will eventually ruin the coils. And the third type will not run with out wires.
Use AC/Delco spark plugs. The wire choices are numerous. Ask for OEM type plug wires unless you are racing this vehicle. In that case ask for Accel performance plug wires.
autolite platinums, the gap is .50
Any 8mm wire will work fine.
It entirely depends on the vehicle's type of engine and the number of cylinders it has.
2000 4.0 jaguar s type cylinder firing diagram:FRONT OF CAR5 16 27 38 4
I've had really good luck with the Bougicord brand, I believe that they are OEM.
The spark plug wires fire in the 1, 3, 4, 2 order on the 1991 Mercury Topaz GS 2.3 engine. This is the most common engine type for this vehicle.Ê
THE SPARK PLUGS ON A 2000 JAGUAR S-TYPE ARE LOCATED UNDER THE VALVE COVERS, ON TOP OF THE VALVE COVERS THERE IS A SMALL PLATE COVER WITH 8 LITTLE BOLTS THAT NEEDS TO BE REMOVED WHICH WILL THEN SHOW YOUR COILS, UNPLUG COILS PULL COIL OUT AND SPARK PLUG WILL BE LOCATED UNDER THE COILS. HOPE THIS HELPS
To locate the spark plugs in your vehicle you need to follow your spark plug wires too your valve cover. After removing the wires you should be able to locate the spark plugs themselves by shining a light down into the engine head. If removal is necessary you will need to have a special socket that is called a spark plug socket this type of socket can be purchased at auto part stores and is specially designed to allow removal and replacement without damaging the spark plugs.