0
If they have been connected to their feed wires correctly, socket outlets should not allow any electric current to pass through when they have been switched off.
<><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What would cause a ceiling fan's lights and fan to stop working while the small LED on the wall switch still lights when it is switched on?
That led is only showing that there is power to the switch and/or the light and fan fixture. You would have to check the power at the fixture to determine if it is actually in the switched feed or the fan/light assembly.
Do light sockets without bulbs in them still use energy when their switch is turned on?
No, but they represent a shock hazard.
What is an electrolyte that is completely dissolved in a solution and still can conduct a sharp electrical current called?
Strong Electrolyte...I think.
Electric wall socket stopped working why?
Try checking your breaker panel for a tripped breaker, sometimes they can trip and it appears to be on still, to be sure turn off all single breakers completely to the off position to reset and then back to the on position. or There could be a switch controlling that paticular recepticle also, so check all switches in the area to be sure that its not just turned off. Sometimes recepticles are wired as (half hots) which means that half of the recepticle is always hot and the other half is switched. Also they can switch the entire recepticle with a switch(both sockets or halves). finnally The connections in one of the boxes between the recepticle and the breaker could be loose preventing power from getting to the recepticle. If this is the case you will need an electrician to locate the loose wire.
If a dimmer switch is turned to a low position but not off is it still on?
Yes it is still on and using as much power as if it was on full
What would cause a ceiling fan's lights and fan to stop working while the small LED on the wall switch still lights when it is switched on?
That led is only showing that there is power to the switch and/or the light and fan fixture. You would have to check the power at the fixture to determine if it is actually in the switched feed or the fan/light assembly.
Do people still play Battlefield 4 on PS3 or have they switched to the PS4?
Most people are still playing Battlefield 4 on the PS3, but some have switched to the PS4.
Can you still spend lire in Italy?
No. Italy switched to the euro in 2002.
Unused fridge still work if switched off 7 years?
Yes
Do light sockets without bulbs in them still use energy when their switch is turned on?
No, but they represent a shock hazard.
Does copper conduct when it becomes bent?
Yes it still can.
Did salt with water conduct electricity?
Yes still it does
Can plants still conduct photosynthesis without light?
No
Is b5 still together?
Yes, B5 is still together.=They just switched record Labels.==They use to be from Bad Boy Records (2003-2008)==but they switched to Atlantic Records (2008-Present)=
What can be the problem on a 1997 ford expedition that the brake light are not working after putting in new bulbs new fuses and a new switch and the brake lights still dont want to work.....?
Check for power at brake light switch Check for power and ground at the brake light sockets open wire?
Why does having the microwaves switched on and off help the food defrost?
The defrost mode of a microwave oven turns the microwaves on and off repeatedly to reduce the power. Reducing the power reduce the chance of one part of the food becoming hot while other parts are still frozen.
Is Dad still alive?
technically yes because he switched bodies before sealing the fox
