0
fill up the system turn heater knob all the way to hot and run engine and keep your eyes on the temp gauge don`t let it overheat what you doing is getting the air out of the heater core when gauge started to clinb to much turn engine off and wait about 10 minutes be careful at this time put more coolant in reservoir (you can do this on a hot engine as that is water but antifreezze).run engine again the reason for doing this is because the heater core is mounted abovedthe engine
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you remove heater air lock on Toyota Previa?
look in how to bleed air off cooling system
Radiator cap is cold the engine is hot?
thermostat or air in clling system replace thermostat and bleed the system
How to fix a 1996 Honda civic radiator hose?
You don't fix it you replace it. Drain the radiator, replace the hose, and the thermostat, flush the system, install a 50/50 mixture of antifreeze and water, bleed the system.
How do you bleed air from radiator of a 2000 range rover?
How do you bleed air from radiator of a 2000 range rover?
How do you change antifreeze in Mercedes slk 230?
Drain your radiator. (there is a drain plug at the bottom of your radiator or at the bottom on the side). Dont forget to take the radiator cap off first. (to prevent an airlock). Replace plug. Top up with new water and anti freeze mixture. Start engine and bleed from bleed screw on radiator. sorted
How do you bleed front brakes Toyota hiace?
bleed pattern for toyota hiace 5th edition
How do you get air out of a heater core on a 97 s10?
Replace the radiator cap and be sure the coolant reservoir is kept full to the line, it will bleed itself.
Are there 2 fuel filters on 1991 Toyota Previa if so where are the located?
On my 91 previa it is in front of the gas tank right behind you driver door. Do not use impact gun to losen or thighten these blots. Hold the filter body with gloves then losen. Remember you should replace the filter and seals they are metallic seals two on each side. Turn IGN on and of three times before starting this should bleed the line. have fun it shoulden't be difficult.
How do you replace brake fluid for Toyota Sienna?
You will need to bleed the brakes, starting from the caliper furthese from the master cylinder then moving closer.
Where is the radiator bleed screw on a 94 BMW 525i?
next to the radiator cap on top of the radiator
How do you replace an astra radiator?
remove front bumper it comes out the bottom. of course detach anything else holding it in. bleed the system upon refilling.
How do you bleed the radiator on a 2000 Nissan Quest?
take radiator cap off, make sure radiator is full, start the engine let it water circulate for awhile and then open radiator drain slightly just enough to get water and air to come out,drain is located under the radiator. Careful not to burn your hand.Turn off radiator drain and replace radiator cap.
