I believe that you fill it with coolant, as the tank's name suggests.
You don't "fill up" the water pump. The water pump is just a pump that moves coolant throughout the engine cooling system. You add coolant at the radiator or the coolant recovery tank.
By 1liter concentrated coolant oil and mix with 3liters of water and fill the expansion bottle up to the maximum level
fill cap what a hueso
coolant fill tank
first drain then undo clips holding it in then then undo hoses put in new one do up hoses then replace clips then fill with 50/50 coolant and water
At the radiator or overflow tank. Do not add water, add coolant.
What ever the radiator and reservoir fill capacities are, half of the system should be water and the other half coolant in other words if you have 12 gallon cooling system 6 gallons should be water and the other six gallons should be coolant/antifreeze but at your local parts store you can find prefilled jugs of coolant which is called 50/50 - 50% coolant and 50% water.
the coolant goes in the reservoir on the passenger fender. use a 50 percent water to 50 percent green coolant to fill it.
Let's drain the coolant, fill it with water, and find out!
If you are talking about a vehicle, then the coolant level is critical for generating heat. Check you vehicle coolant reservoir if it is empty, wait until the engine is cool and check the level of coolant in the radiator and fill as recommended with the appropriate kind of coolant then fill the reservoir to the level indicated.
The amount of coolant it will take to fill your vehicle is dependent upon how low the coolant level is. You can add coolant to your coolant reservoir. The reservoir will have an indicator of when the coolant system is full.
the owners manual says to put in 50% water and 50% coolant. I spose u just fill it up with this ratio.