Yes. 20.99 at autozone for me yesterday, they are torque specific so they need to be replaced.
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.
Remove the intake manifold retaining bolts from your 1996 Chevy Astro Van. Remove the manifold gasket and clean the surface. Reverse the process to install the new intake manifold gasket.
take out the bolts where the top radiator hose enters the motor,pull out thermostat,clean off gasket material on both sides,install thermostat and new gasket,tighten bolts
you just pull the three bolts holding the valve cover down. the bolts run right down the middle of the valve covers. pull the valve cover off, replace the old gasket with the new one and tighten the valve covers back on.
Begin by removing the valve cover retaining bolts. Peel the old gasket off and clean the surface. Put the new valve cover gasket on. Replace the valve covers to their original position.
You cannot use the old bolts to retorque the heads. They are torqure to yield bolts. You must get new bolts.
You can change the oil pan gasket in your 2000 Chevrolet S 10 pickup truck by removing the oil pan bolts. Once the bolts are removed the oil pan will come off. Remove the old oil pan gasket and replace it with a new gasket.
Drain the oil from your Chevy oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new gasket on and reverse the process.
Follow the top rad hose to the engine , There you will find the housing undo bolts , clean gasket on housing replace with new gasket and thermostat. Make sure engine is cool and drain anti-freeze first
no gasket is used
Yes, replace the head bolts with new ones.
It should take about an hour to change the intake manifold gasket. This part can be replaced by taking off the intake manifold cover, cleaning the old gasket off and sealing a new gasket in the space and tightening the bolts. When other things are in the way, like the alternator, it will take longer.