0
Do you have to change plastic timing cover after removing on gm 5.7?
Wiki User
∙ 13y ago
Yes. Read the front of it. The reason being is because of the front crankshaft seal in the front of the cover can NOT be bought by it's self. The only way to get that seal is to buy the cover.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Removing the cover to change the headlamps on PT Cruiser?
There is a plastic cover in the front wheelwell that gives access to the headlamps
How do you change an oil pump on a 2000 Saturn SC1?
The oil pump is ran off the crank and is in the timing cover which requires removing the valve cover and timing cover. Not recommended for the novice mechanic.
What is the plastic cover called over the timing belt?
Timing belt cover
How do you change the timing belt for a 1999 Kia Sephia?
The timing belt on a 1999 Kia Sephia is changed by removing the timing cover, loosening the tensioner, and pulling the belt off. A new belt is then put in place and then tension reapplied.
What are the timing marks on a 1991 Mercury Tracer?
There are raised ridges oon the plastic timing cover that provide the timing marks
How do you change timing cover gasket on 1999 Chevy lumina 3.1?
how to change timing cover gasket on a 1996 chevy lumina
When to change the timing belt on a Mazda mx3?
The timing belt on the b6 & k8 motors should be changed every 60-80k miles depending on the wear of the belt. You can check the wear yourself by removing the valve cover on the b6 model where as the k8 is somewhat more difficult and will require removing the timing cover. If there are any nicks, frays, or cracks the belt should be replaced.
Do you have to take the oil pan off to change the timing chain cover?
To do the job properly, yes. But with experience and a few tricks it can be done without removing the pan.
Where is the water pump on a 84 Toyota corona?
hi its behind the black plastic cover behind fan belts and behind the timing belt,not that hard to change if you mark where the timing belt was and its pulleys ..good luck.
How do you remove the plastic cover that is over the timing belt on 1994 ford ranger XLT?
Remove the valve cover
Removing the timing chain on a Saturn sl2?
you have to remove the valve cover , the oil pan and the front timing cover. Then line up all the timing marks and remove the tensioners and guides then remove the cam gears and the chain
Does a Ford Focus 1.8tdi have a timing chain?
yes they do have a timing belt . u can check this by removing the cover on the end of the engine,hope this helps
