No, you go in from the passengers side under the dash. it is best to remove the big dash bolt from the body to allow for wiggle room but not required.
You need take out the whole dash board and your steering wheel
Your battery is about dead .
do I remove steering wheel to change out ignition
How do you change a 1998 jimmy 4X4 front wheel bearing ?
Take the nut of the steering wheel under the horn and use a puller to get it off
A person removes the steering wheel with a steering wheel puller, after removing the airbag to the car. Then they put the new steering wheel on the car, after aligning it correctly.
To change a steering wheel a person needs a steering wheel puller to get the old one off. Once it is off, replace it with the new one, which will go on easily when aligned correctly.
no they do not have the same wiring harness 65;
take it to your dealer or service center and tell them to change the steering wheel that's what i did or if you tried that there should be a cap on the front of the wheel and you snap it open and there should be bolts.
In the steering wheel column. The hazard toggle switch is connected to it.
If the steering wheel has radio controls on the wheel, there could be a problem in the wiring. When the wires connect electrically it will cause stations to change.
just change it from keyboard to keyboard and steering wheel and then calibrate your wheel and pedals in settings easy.