0
Do you have to pull out the transmission to get to the slave cylinder in a 1997 Chevrolet Cavalier?
Wiki User
∙ 18y ago
No
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
Where do you find the clutch slave cylinder on a 1998 Chevrolet Cavalier?
the clutch slave cylinder on this car is located inside the transmission itself. The part has a rubber bushing that separates the the hydraulic lines and bleeder, from the section that is located in the transmission housing itself.
Where is the Clutch slave cylinder on my 2003 cavalier?
its right in the transmission
Where is the clutch slave cylinder on Chevy 2003 cavalier?
Inside the bell housing, the transmission has to come out
How do you Change a clutch slave cylinder on Cavalier?
The slave cylinder is mounted directly over input shaft on transmission behind clutch. Unfortuantely the transmission must be removed to access it. You will see it bolted to tranny once you get it out.
How do you release the plastic line to the slave cylinder in a 1989 Chevrolet Cavalier?
If memory serves me right, you press in on the collar at the cylinder and hold it in while you pull on the line.
Can you change a slave cylinder in a 1995 chev cavalier without pulling the trans?
no you cant you have to pull the transmission out(all the way out) to get to the slave cylinder theres no way around it sorry. i have a 95 cavalier myself and ive changed it twice. hope this helps
Is the slave cylinder on the inside or outside of the transmission of a Ford Ranger 2002?
The slave cylinder is INSIDE the transmission bellhousing , it slides over the transmission input shaft , and then is bolted to the transmission. To change the slave cylinder the transmission has to be removed , but the slave cylinder line can be blead from the bleeder outside of the transmission bellhousing
On a 1996 Chevy Cavalier slave cylinder the stiff hose that comes out of the bottom how is this pulled out of the piece that enters the transmission?
If I am understanding the part you are talking about the. It is the metal line that goes into the slave cylinder that attaches to the rubber hose from the slave cylinder... Depending on your slave cylinder it is/was held in by a plastic horseshoe style clip that could have broke from a stress fracture manufacturer defect or overheating
Is slave cylinder on 2000 f150 4.2 inside transmission?
Yes , the slave cylinder for your hydraulic clutch is inside the manual transmission bell housing. It slides over the input shaft to the transmission and is bolted in place inside the transmission . To CHANGE the slave cylinder the transmission has to be removed , but the lines to the slave cylinder CAN BE BLEAD from a fitting that extends outside of the transmission bellhousing
How do you replace the clutch cylinder slave in a 1997 Chevrolet S10 pick up?
Replacing the clutch slave cylinder requires removing the transmission assembly. I would recommend purchasing a shop repair manual for that vehicle if you intend on DIY.
Is it the master or slave cylinder that sits outside the transmission casing on a 94 Toyota Tercel?
The slave cylinder would be the part at the transmission.
Where is slave cylinder on 1997 Isuzu hombre?
The slave cylinder is on the input shaft of the transmission at the throw out bearing. The transmission will have to be removed to change it.
