Cars & Vehicles
Alternators
Ford Ranger
Toyota Tacoma

Do you have to readjust the alternator belt after put in a new alternator?

323334

Top Answer
User Avatar
Wiki User
Answered
2005-09-09 22:48:57
2005-09-09 22:48:57

Yes.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.

Loosen the tensioner pulley. The alternator belt will come loose. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner pulley.

Loosen the tensioner bolt on your alternator. Slide the alternator to the left. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner bolt.

You will need to loosen the alternator belt with the tensioner pulley. When the tensioner pulley is loose the alternator belt will become loose. Put the new alternator belt on and tighten the tensioner pulley.

You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.

locate the alternator take off the belt put new one on then the belt and your done

Begin by loosening the tensioner pulley on your 1999 Mitsubishi Eclipse. The alternator belt will become loose and can be removed. Put the new alternator belt on and tighten the tensioner pulley.

What belt? Drive belt is easy, just loose the 3 bolts on the alternator, pry the alternator forward, put the new belt on, pry the alternator back, and tighten the bolts. Power steering belt is much more difficult.

Disconnect the 1982 Regal alternator. Loosen the alternator bolts and slide to release belt tension. Put new belt on ( you may have to remove other belts to gain access) and pull the alternator sideways to put medium tension on the belt while tightening the bolts. Reconnect the battery.

Loosen the alternator and push the alternator down and pull the belt off, put new belt over crank and water pump pulleys and around alternator pulley and pull up on the alternator to where the belt is tight and tighten the alternator bolts down.

Disconnect the battery Remove the engine covers to access the alternator drive belts. Remove the electrical connections from the alternator. Slacken the bolts, remove the belt. Remove bolts, put new alternator on, tighten bolts until you can just move alternator, fit new belt, move alternator so the belt is tight and then tighten bolts to their specified torque.

unhook the serpentine belt, unbolt the old alternator, un-clip the electrical parts, bring the old alternator back to the store for its core :) put the new alternator in exactly as you found the old one, put the serpentine belt back on, run for 5 minutes, re tension the belt

Use a large wrench to take tension off of your serpentine belt and remove the belt from the alternator, (just the alternator). Disconnect the wires. Remove the bolts then the alternator. Put new alternator in place using old bolts. Replace wires (may only be one wire, depending on the alternator). Get your large wrench back out, put the belt back on the alternator, and your good to go.

The alternator on a 2001 Nissan Sentra is replaced by loosening the serpentine belt tension, loosening the alternator bolts, and slipping the belt off the pulley. The alternator can then be unbolted, the wiring harness disconnected, and a new alternator put in place.

The alternator belt on a 1998 Honda Civic is replaced by loosening the mounting bracket, disconnecting the wiring harness, and slipping the belt off the pulley. The alternator is then unbolted, removed, and a new unit put in place.

unhook the battery, remove the cerpintine belt, remove the wires, remove the bad alternator, put on the new alternator, replace the wires starting w/ the negative one, replace the cerpintine belt, tighten the belt.

your fan belt may be connected to your alternator if so loosen alternator romove belt put new one on and pull alternator back until proper tension is aqquired tighten

Remove the alternator belt on your 2000 Oldsmobile. Disconnect the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Put the new alternator on and reverse the process.

You will need to loosen the tensioner pulley. Put the alternator belt on. Push the tensioner pulley to the left until the alternator belt is tight. Tighten down the tensioner pulley.

The 1995 Infinity alternator can be replaced by removing the alternator belt. Removing the wiring harness from the back of the alternator. Removing the alternator retaining bolts. Put the new alternator on and reverse the process.

What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.

Take the old one off and put a new one on..

Remove the belt from your 1998 Chrysler Town and Country alternator. Disconnect the wiring from the alternator. Loosen and remove the alternator retaining bolts. Reverse the process to put the new alternator on.

loosen the tension on the belt with the tension pulley, remove the belt then disconnect your wires from the alternator then take the 3-4 bolts, holding the alternator on, off. then do the opposite to put the new one back on


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.