0
Do you have to take the torque converter off to replace the flexplate on a powerglide transmission?
Wiki User
∙ 14y ago
yes
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you replace a flexplate on a 1991 Chevrolet caprice?
Remove the transmission and starter. Unbolt the flexplate from the crank. While you're at it, replace the rear main seal. Replace the flexplate and torque bolts to manufacturer's specs.
How do you replace a flexplate on a 1994 Jeep Cherokee?
The transmission will have to be removed.
Can you replace Chevy flexplate without removing tranny?
You will have to slide / move the transmission back enough to get your hand up in between the flywheel and toqure converter so you can remove the flywheel bolts. You do not have to compleatly remove the transmission. I do it all the time.
How do you replace the torque converter on a 2005 Dodge Grand Caravan?
You have to remove the transmission to replace the torque converter.You have to remove the transmission to replace the torque converter.
How do you replace torque converter on 1995 GMC Sonoma 700R4 transmission?
pull engine, unbolt torque converter from flex plate (3 bolts), fill new torque converter with ATF fluid(so it dont start up dry), place new torque converter on to the transmission input shaft, reinstall engine, from underneath now u can spin the engine over by hand to line up the bolt holes and tighten the torque converter to the flexplate.
Can I replace flexplate without dropping transmission 99 Honda Accord?
No. The flex plate is on the transmission input shaft between engine and transmission. To get it out you have to pull the transmission. Fortunately, it's not hard to do.
How do you replace rear main seal for Chrysler 2.7?
You remove the transmission, and the flexplate(flywheel) to access the rear main seal.
Can you replace torque converter without the transmission?
Yes
How do you replace a back crankshaft seal on a 1984 ford 2.8?
You have to drop the transmission or pull the engine. remove the flexplate and oil pan.
How do you replace a tcc on a 1985 fiero 2.8 v6?
Torque converter clutch? Remove transmission Replace Torque converter Reinstall
Where is the front seal on a transmission for a 1994 Chevy blazer s10?
The front seal on your automatic transmission would be between the torque converter and the front pump of the transmission. The transmission would have to be removed along with the torque converter to replace the seal.
How do you change the torque converter clutch on a 1998 Mercury Sable?
The torque converter clutch is inside of the toque converter. You must replace the whole torque converter as an assembly. The torque converter is sandwiched between the engine and transmission inside the transmission bellhousing. To access and replace the torque converter, the transmission will have to be removed. The trnsmission on that car is removed by raising the car on a hoist, supporting the engine with a special engine support tool, removing the lower engine cradle assmebly, and removing the transmission out through the bottom of the vehicle.
