The blaster 200 is a 2-stroke, therefore you need to mix the gas and oil, trying running a 50:1 ratio, 50 parts of gas to one part of oil.
It is best to just do it your self trust me,but 32.1
you can use pretty much any unleaded gas but it runs a little better on 89 octane , or higher but if you have a stock blaster you can run 87 octane
Yamaha Blasters take unleaded gas only.
32 to 1 which is one gallon of gas to 4 onces of oil
32:1 gas to oil mixture
30 liters of gas to 1 liter of oil
on the gas line between the gas tank and carb but it might not have one
It would be wise to.At 32:1 ratio
Yamaha's Yamalube, 2 stroke oil is a good choice.
You don't. You can remove pump and pre-mix the gas.
your kidding right? you realize its a 2 stroke which is supposed to smoke because you have to mix oil in the gas
if there isn't one in between the fuel line from the gas tank to the carb then no but you can easily add one