you only need an amp to boost the bass in your stereo system with a sub woofer (10'', 12'',15'') so No you don't necessarily need an amp!!
Behind the carpet on the left side of the trunk. Well, that's where it is for me.
yes the amp is in the firewall behind the radio and also yes you can replace the factory sub with any 8 in sub of your choice.
First you should determine why the is no sound to begin with?If the entire radio system does not work at all you might have a simple electrical problem within the radios wiring.Possibly a blown fuse, or a loose connection behind the stock radio unit.Installing a new head unit(radio)may be your answer,but then you may have speaker issues as well.
Try Crutchfield.com for installation kits.
Insert 4 small pins in the holes on the front of the radio and pull out.
Tie wraps can be used to replace a stock radio wiring harness in a 1991 Mercury Tracer. The wires can be replaced with other radio wire from an automotive parts store and the tie wrap can hold them together.
all gms with a stock radio keyless remotes get reset though it, again it is step by step in owners manual
Brakes, If you get on brakes and get a hard vibration and shaking like the front end is going to fall off, front rotors are more than likely warped. Stock rotors are poor quality Replace with after market heavy duty rotors.
One can find the most accurate stock market date for AGRO by browsing any real-time stock market websites. CNN Money, Nasdaq, Bloomberg, and The Street all over live stock market data for AGRO. One can also get daily updates in the newspaper or on money and business radio stations.
CNN Stock Market operates every day of the week. CNN Stock Market offers information on the latest news and trends on the stock market with stock quotes.
if your asking if you can put subwoofers on the stock radio then no you have to have an aftermarket radio
first don't remove your stock stereo if u havn"t already. The radio works with the carscomputer to reset codes and other stuff. you can get an adapter that turns your speaker wire on the back of the radio into left and right channel to hook up to an aftermarket amplifier. then hook up your new speakers and sub woofer to the amp and use the stock radio to get your grove on. or install an after market radio in the glove box or middle console but don't remove the stock radio. get rid of the stock amp not powerful enough.