0
Do you need special tool to remove the inner trunk panels on your 2008 Nissan altima to replace burnt lamp?
Wiki User
∙ 13y ago
No, most definitely not. A small flat screw driver to pop out the inner plastic piece and then popping out the larger outer shell will be easier. Once you have done it you will develop a feel for it. Afterwards two nuts(don't drop them) and freeing some slack on the wiring past the grommet, and you will be set to free the tail lamp.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you replace the tail light assembly on a newer model Nissan Altima?
If you remove the panels from the interior of the trunk you should find the bolts that hold the taillamp assembly to the body of the car. Simply remove the nuts and this releases the lamp assembly.
How do you replace the ecu on 1998 Nissan Altima?
Disconnect the battery and let set for 10 minutes so you dont set off the air bag. Remove the kick panels on bothe sides of the center console. Remove the bolt/retainer on the connecter and then remove screws on the monting bracket.
Remove rear interior panels in a 1990 Nissan 300zx 2 plus 2?
The 1990 Nissan interior panels are held in place with eight retaining clips. Pry outward on each retaining clip to remove the interior door panels.
How do you replace right tailight on 2004 rav4?
The access panels to the light assemblies are the small rear corner panels of the storage compartments on left at right. After opening storage panels, you can pop out the rear corner panels--reach in, pull out the old bulb & socket, replace the bulb, reinsert the socket, then replace the panels, and you are done.
Fence Panels?
form_title=Fence Panels form_header=Get help building or repairing your fence from professionals. Do you need panels to build or replace a fence?*= () Build () Replace Type of panels?*= () Vinyl () Cedar () Metal () Other What dimensions do you want the panels?*= _[50] Are you looking for a service to install your fence panels?*= () Yes () No
How do you change speakers on a 1998 Nissan Altima?
I recently changed out the speakers (front and rear) on my 1998 Altima and while I was eventually able to do it, it took quite a while to figure it all out. To replace the front speakers, you'll need to pry off the door panels (at least enough so that you can get a screw driver in there). I can't remember exactly what else I removed but be prepared to remove the housing around the door handle, window switches, etc. The back was MUCH more complicated as the speakers are only accessable from inside the car and this requires you to remove multiple interior panels and molding so that you can get under the rear deck. It is confusing at first but once you start the process it becomes clearer. Try to use the Nissan speaker adapters plugs so you don't need to cut wires and mess up the electric system, you can get those from eBay or amazon.
What do solar panels replace?
coal, oil, and gas for electricity and transportation. Solar power and panels replace all fossil fuels and are much better for the earth.
Is there a special tool for removing tail light lens to replace the bulbs on a 1993 Toyota corolla?
You do not remove the lense, the bulb should be replace from inside the trunk. You may have to loosen a few interior panels or there may even be access panels. If you are having a hard time go to the auto parts store, they should help you at no charge.
How do you remove the door panels in a 2001 Nissan Frontier?
Removing the door panels from a 2001 Nissan Frontier is very simple. The door panel is held in place by a few screws only. Remove the screws and pull on the panel gently to remove it.
How do you replace speakers on a 2008 Chevy Silverado?
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
How do you replace brake lights in 1994 Nissan 300zx?
Remove brake light interior trim panels. Then you push and twist the socket for the brake light that needs replacing. Then pull out socket. then pull out bulb from socket and place new bulb in the light socket. Once bulb is installed into light socket. Place the socket where you removed it from brake light housing. Push and twist clockwise to lock back in place. Then replace trim panels.
This energy is collected through the use of special panels?
solar energy
