Want this question answered?
ask Andy fox from bridlington...
To remove the air filter on the Fiesta MK6, first remove the bolts on the top of the air filter box. Then, pull upward to remove the rubber gasket around the box. Remove the screws at the rear of the box. Remove the filter and replace it.?æ
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
You have to remove the exhaust pipe from exhaust manifold on starter side. Now you have access. Get exhaust pipe to exhaust manifold gasket first, you will probably need to replace it after taking them apart.
this is a mechanics job you have to remove inlet manifold,exhaust manifolds,and then remove heads to replace the valves
Remove the intake and exhaust manifold, then remove the head.
Remove intake & exhaust manifold, then remove head. Requires knowledge and skill.
Open the bonnet. Remove the grill. Remove the screws holding the headlight in. Carefully pull the headlight out. Remove the cap on the rear of the headlight.
To replace the mirror glass on a Ford Fiesta first remove the clips holding the mirror in place and remove the glass. Next, heat the adhesives with a hair dryer or hot gun and use a putty knife to remove the adhesive from the mirror housing. Add glue to the corners and put in new mirror. Press the mirror into place for one minute and replace the clips.
You can do it if you remove the heat shield it works.
You cut it off of the exhaust system and replace it with a straight piece of exhaust pipe Know that it is illegal to remove a converter without replacing it with a new one.
How do you remove the bottom front right airbag on a 2011 ford fiesta.