0
Do you need to warm Chevrolet venture before removing water pump?
Wiki User
∙ 15y ago
No you do not.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the coolant capacity of a 2003 Chevy Venture?
The 2003 Chevrolet Venture coolant capacity is four gallons. The coolant can be mixed 50 percent anti-freeze and 50 percent water.
How do you replace a heater core in a 1997 Chevy Venture with AC?
You will need to remove the anti-freeze from your 1997 Chevrolet Venture cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
How do you replace the water pump on a Chevy Avalanche 5.3L?
The water pump, on a Chevrolet Avalanche 5.3 liter, can be removed by first removing the water hose. Remove the four bolts to the water pump cover. The water pump will slide out. Reverse the process to install the new water pump.
How do you install a water pump on a 1998 Chevy Venture van?
how hard is it to replace a water pump on a 1998 chevy venture van?
How do you fix heater on 2004 Chevrolet venture?
Check to make sure that the engine coolant is full. The thermostat must be working properly as well as the water pump. The hoses going to the heater core should be warm from the water if the climate control is working on the heat side.
Show you a diagram of a water pump for Chevy venture van 2003?
please show me a diagram of a water pump on the engine of a Chevy venture 2003
Where is the water pump located on a 1989 Chevrolet Corsica V6?
The water pump is located behind the water pump pulley. The water pump pulley is the smooth pulley at the top closest to the front of the car. It is held in place by 4 bolts with 8mm heads. The pump is held in place with 5 bolts. Warm the engine to operating temperature before removing the bolts or they may break off causing you greif.
What are you removing when you lower the temperature of water?
you are removing heat!
When you lower the temperature of water what are you removing?
you are removing heat!
Why was it necessary to match the water levels inside and outside the cooled flask before removing it from the water bath?
So to equalize the pressure inside the flask with that of the atmosphere.
Windshield wipers frozen to windshield on 2003 Chevrolet Venture how to free them?
warm... NOT HOT. water pour it over and slowly peel the wipers up from one side to the other. then pull the wipers back( up?) so they are not in contact with windshield when not driving
Is removing salt from water a suspension or is it a solution?
Removing salt from water is a process, not solution/suspension. Salt form with water solutions.
