answersLogoWhite

0


Best Answer

No. The valve springs can remain on the head when removing the head.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Do you take off the valve springs to get the head off?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace valve seals on v8- 89 Chevy truck Ive heard stories of using air pressure to lift pistons and What is the difficulty?

First of all the air is for holding the VALVES up in the head so they don't fall down into the cylinders when you take the valve springs off of the valves. You should have a trained mechanic do that job for you. If the valve falls out of the head then you will have to remove the cylinder head to get it out.


Where are the head bolts located prelude?

Your head bolts are located under your valve cover. Take your valve cover off and you will see them. Hope this info. helped.


How do you change a burnt valve?

take your cylinder head off and change it.it is usually easyer to change the head


Do you have to take off the head to fix a lifter on a jeep grand Cherokee?

No, they are located under the valve cover.


How do you change valve guides?

Take your head to a machine shop. Trust me, you'll be better off that way.


How do you fix a stuck valve on a 8 horse Tecumseh engine?

Take the head off and replace BOTH valves.


Where is the head gasket located on a 1992 Pontiac grand am?

Between the head and the block. First, remove intake manifold and exhaust manifold. Take the valve cover off and unbolt the head. Then, pull the head off and you'll see the gasket.


Do you have to take out the full rocker spring and valve and etc when pulling the head to change the head gasket in a 1994 Lincoln Continental?

no, you should just have to take out the bolts that keep the heads connected to the engine block, it may be sticky trying to take it off because of the gasket but it comes off.


How do you get the head off of a Suzuki samurai?

just did one take ur 4 bolts off the valve cover and u will see ur lifters and look closer there should be 10 bolts holding down the head


What valves on small block Chevy are exhaust?

If you have the heads off then the small valve will be the exhaust. Now if the heads are still on the block then remove the valve cover and look at the valve springs. Starting at the front of the head and moving towards the rear the valves will be in this order. E I I E E I I E The E stands for exhaust and the I stands for intake.


How do you fix a stuck valve on a Chevy 350?

ive used a c-clamp valve tool , but the valve that was stuck actually bent my c-clamp tool . now im at a stand still how do i get this vlve out without wrecking my head Sorry to hear about your troubles. It sounds like you're going to have to cut the valve off as close to the tower as possible and drive the valve out with a hammer and punch. This will probably damage the valve guide, which will require taking the head to a machine shop. Best plan is to take the head off and give it to a qualified machinist.


How do you change the head gasket set in a 94 Lincoln Continental?

Your gonna have some work in front of you because you have to take off the head that covers the cylinders just to get to the gasket. You have to take off the valve cover the the bolts that hold the head on, you may have to get new bolts to put in though, ask the nearest parts store.