answersLogoWhite

0


Best Answer

No, it can't have too much compression. It sounds like the battery or starter motor is going bad. Fully charge or replace the battery, then have the starter tested.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Does Briggs stratton engine has to much compression acts like the battery is weak if the plug is out turns freely have set the valves to the best of abilities is there something else?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What will cause compression lock up on a Briggs and stratton lawnmower only when spark plug is in?

Probably has something to do with the compression release or valve adj. Look at troubleshooting in the manual. You did not say if your lawnmower is gas or electric. Problem (not starting) could mean the spark plug is fouled, improperly gapped, or damaged. Does it crank but the engine never catches? You didn't say Is there an electric starter? Outlet might not be live - battery could be weak or dead or there could be bad connection or bad starter motor.


What would cause a 16HP Briggs and Stratton motor not to turn over at all?

Maybe no juice in the battery.


Why won't a Saturn start if the battery is good?

Check for spark fuel and compression


What is the cylinder compression for a kawasaki bayou 300 ATV?

Mine is in great shape, '03 Buyou 300 4x4. Cranking compression w/good battery and starter is 160lbs after 4-5 compression strokes.


Why car does not start?

It needs battery power, fuel, compression and spark to start and run. You are missing one of those.


How do you check a Briggs and stratton alternator?

check the battery with voltmeter without the engine running then check with it running if voltage is higher it is working


How much compression is good on a Briggs and stratton 12hp engine?

Since they have a compression release, it is a bit difficult to get an accurate reading...you must get to +_350 rpms. if your starter is in good shape, attach jumper cables from your car to your battery which will provide the amps to spin it fast enough for the compression release to...release. To get to the point...if the engine is spinning at less than 350 rpms it should read 60-90. over 350...75 - 110. Another option to get an accurate reading is to turn the engine backwards. This will take the compression release out of the picture. You can do this by making use of a drill with a socket driver and attach it to the flywheel nut and turn the engine in the opposite direction, usually counter clockwise, through 10 or so compression strokes...compression should be between 80 and 110. Hope the helps


Your stratus does not start and the engine just chirp?

it sud be many things, it could be something as simple as dead battery. or maybe the valves are bent... so you might not be getting pressure to start.. you might want to do a compression test.


Why would a 02 Chevy suburban not start even though it has a new battery?

Does it have fuel/spark/compression?


How do a battery use?

The battery help to get something which is electric to get the power.


Could something other that alternator cause battery to drain on 2005 C180 Kompressor?

Yes, a dead cell in the battery or something is on drawing power from the battery.


Why wont my 1996 Chevy 1500 start?

Does it turn over? No Fuel? No Spark? No compression? Weak or bad battery?