as long as its not an RS or Type R.
To reset the ABS light on a 1994 Acura Legend Coupe you will first need to find the fuse or relay box under the vehicle's hood. Remove the 3 15 amp fuses located in this box. Replace the fuses after approximately 30 to 60 seconds. This will reset the ABS light.
The 1997 Acura 3.0 CL has 4 wheel ABS. The rear ABS connectors are on the backside of the right rear control arm. The plugins are an orange color.
On a 1995 300zx N/A Coupe it is located behind the passenger seat under the plastic cover where the ABS assembly is. It is in a black box on top of the ABS unit under the black cover. There are two relays one has a raised tang on it that is the abs motor relay the other is the solenoid relay. Should be the same for 1990 to 1995 and maybe more and TT should be the same, do not know where the 2+2 relay is.
the relay is in the abs pump
The "main relay" is inside the abs computer. If you have the Main Relay code, the abs computer has failed.
The Mazda ABS relay switch is located on the firewall in the engine compartment. The ABS relay switch will be on the passenger side of the firewall.
The ABS relay is in the relay box under the hood.
No, it does not have ABS front or rear.
The ABS pump motor relay is not serviceable. It is part of the ABS modulator valve.
The 2002 Chevrolet Suburban ABS relay switch can be found on the firewall in the engine compartment. The ABS relay switch will be on the drivers side of the firewall.
On a 2000 Ford Expedition the ABS Relay problem is a problem with the braking system. Either the ABS Relay needs to be replaced or the brake pads are worn down. The ABS Relay is located in the fuse box that is on top of the battery in the engine compartment.
relay