Want this question answered?
The 2 stroke will be faster because of differences in Waite but more polluting be it oil mixed with fuel
What is the fuel to oil ratio for a mercury 9.9 hp 2 stroke engine?
yes it has one
Three ounces of Two-Stroke oil per gallon of gas
Fuel to oil ratio for a 8 hp Mercury, 2 stroke model, is 50:1. This is roughly measured out at one pint of 2 stroke oil, to six gallons of fuel.
What is the Mercury 3.5 Hp four stroke valve clearance?
The 850 model, 85 hp Mercury outboard, is a 2 stroke engine requiring a 50:1 fuel to oil ratio.
Web site never did answer the question.
I just changed the oil in my mercury 60 hp 4 stroke and had very little clean up. I let the oil completely drain from the motor before I removed the filter and had No drips there either. Just over 30 minutes to change motor oil and lower unit oil. Total cost of $35.00 included quicksilver 25W40 quicksilver oil filter and quicksilver 80/90 gear oil. Take your time and save your money . No reason to pay a dealer $150 to $250. for this simple oil change. Charliestoybox
The non oil injected, 2 stroke model, 70 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
A 15 hp Mercury requires a 50:1 ratio, roughly one pint of 2 cycle oil, to six gallons of fuel, or, 3 oz of oil per gallon of fuel.
The 1976 model, 115 hp Mercury outboard, requires a 50:1 fuel to 2 cycle oil ratio. This is roughly one pint of 2 cycle oil, to six gallons of fuel. The use of 4 stroke type motor oil is not recommended, nor intended, for fuel / oil mix.