Yes the blower is cooling the engine, the main target is to release the pressure of the engine.
Is it the blower motor or is it the fans in the front?if its the fans they will come on at anytime to help cool engine down better.If its the blower motor for the interior heat and air you got a electrical problem. Is it the blower motor or is it the fans in the front?if its the fans they will come on at anytime to help cool engine down better.If its the blower motor for the interior heat and air you got a electrical problem. If it is the blower motor for your heater then it is definatly you blower resistor
It has over 10,000 parts!
You may be low on engine coolant
One definition of an engine blower is a supercharger or turbocharger
oil is used in an engine to lubricate and help keep engine components cool so if you run engine with no oil, the moving parts get hot. when the parts get hot, they expand. when they expand, they bind up on other parts when this happens the parts get more hotter and then basically the parts can weld together. this is caused siezing .then your engine is screwed
all blower resistors are connected to the blower itself usually they have the wires running to them, to replace it you take it off look for a part number go to a parts store give the parts man the Year Make Model Engine and also hand them the Blower Resistor and the can take care of it from there. easier thing to do is remove the full blower to take to them if you do not know what the resisitor looks like.
Blower motor might be good. Check fuse(s) in fuseblock first. Check also the blower speed switch and the blower resistor. A service manual will be indispensable. Auto parts stores sell inexpensive, but usable, versions.
Generally the blower motor resistor is found close to the blower motor. It relies on the blower motor to keep it cool.
The Nissan Quest blower motor is located on the firewall in the engine compartment. The blower motor can be found on the passenger side of the engine compartment.
To keep the moving parts cool and lubricated so the metal does not expand (caused be friction and heat) and seize the engine.
By an auxiliary engine
no