Yes, brass is an alloy made of copper and zinc; the proportions of copper and zinc can be varied in the alloy to create a range of brasses with different properties (e.g. hardness, corrosion resistance) that are needed for different applications.
Both these alloys contain the common metal,copper
Yes.
Copper is cheaper than brass.
The percentages of copper and zinc in the alloy.
Depends on what the usage is do you want YELLOW Brass 60% Copper 40% Zinc Or do you want RED BRASS? 85% Copper 15% Zinc
Sure why not
Both these alloys contain the common metal,copper
Take either an SOS pad or a wire brush and rough up both the inside of the brass fitting and outside of copper pipe, put the copper pipe into the fitting and solder around it.
1st you need to know where the leak is. The only time a copper fitting or brass fitting will fix a leak is in the watersupply connection.
In order to connect a chromed steel pipe to a copper pipe, you will need a brass fitting. These two pipes will not fit into each other otherwise.
Alloys that contain only copper and zinc are usually called "brass"; there are also some alloys that contain one or more other metals in addition to copper and zinc, and these usually have another name.
Yes.
Elements. Copper and Zinc to be specific.
By the use of Flagg Flow T.P Fitting adapters and Cx M or C x F adapters attached to the T.P fitting T.P = threadless pipe
Certainly look up Flagg Flow T.P Fittings T.P thread-less copper fittings will FIT on schedule 40/80 /120 Brass pipe Ideally it should be brazed but soldering will hold domestic water pressures Also many solder fittings ARE CAST BRASS rather then wrought copper
Pennies (copper-plated zinc), objects made of brass (brass is an alloy of copper and zinc), and wires and cables that carry electricity and/or electronic signals.
Did you put the ferrule on, the little brass ring?