place spool of thread on spool pin
Spool pins are used on sewing machines to hold the spool of thread. Most or vertical, some that are horizontal use a spool cap to secure the spool of thread. Some machine come with spool nets to cover the spool to ensure the thread enter the machine evenly. Some machines come with an extra spool pin that fits into a small hole on the top of the machine to hold a second spool of thread.
The spool pin refers to the metal (or plastic) rib on top of, or on the side of the machine that you stick the spool of thread onto. It is usually about 2 inches long, and about 1/4 inch thick. It holds the spool securely while sewing.
A spool of thread is very cheap. Spools of thread can be as cheap as a dollar or less a spool.
Sorry, I have no idea where you are, to suggest any place for you. But there are times when I need to hold a large 'cone' of thread at my sewing machine. Put the cone of thread in a large container, and running the thread through the 'eye' of a safety pin ( that you would tape to the sewing machine ) and run the thread past the stem where a spool of thread would normally sit, then thread the machine as usual. It works very well. I hope this is helpful for you.
the holder of a thread is called a spool
The thread moves from the spool through the needle to make stitches on a sewing machine. The thread take-up lever is what feeds the thread from the spool to the needle as it moves up and down.
a spoolcase is something that you use in sewing or when you sew you put the spool into a spoolcase but you must make sure the spool is filled up with thread then you can start sewing only if you have a long piece of thread in the spool!!
A collective noun for thread is a spool of thread.
A bobbin or a Spool
Thread
I dont have a clue.