Want this question answered?
because the bulb has blown
i dont no
all you have to do is unscrew the cable from the top of your transmission, then from behind tbe actuall speedo
Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Remove gauge package. Remove wires and speedo cable housing. Pull speedo cable out, lightly lube with grease and re-insert. Hook everything back up and re-install gauge packege.
It don't have a cable. It is electronic controlled.
Electronic, no cable.
they don't have speedo "cables". their all electric.
you can buy a tool made for lubricating cables, at a motorcycle shop then u need to disconnect the cable from back of speedo, use the tool and lubricant then reintall cable to speedo usually tho if a speedo cable gets noisy it is worn out and about to break
How to replace spedo cable f250
There is no speedo cable on a Sunfire.
The speedo or the speedo cable might be broken and, or be dissconncted.
There is no cable, the speedo is run electronically.