Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges.
Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges.
Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges.
Remove gauge package. Remove wires and speedo cable housing. Pull speedo cable out, lightly lube with grease and re-insert. Hook everything back up and re-install gauge packege.
speedometer cable is gummed up inside the housing.Remove cable from speedometer.Pull out inner cable. Lubricate with good grease and install.
No cable, speedometer is electric
It's usually the cable or the speedometer head in the dash that have problems Is it possible to lubricate the where the cable and the speedometer head cluster meet? If so, how do you get into the head or cluster?
No. The speed signal is electronic.
A 1991 dodge dynasty speedometer bouncing could be a sticking speedometer cable, or a bad drive gear. Check the cable first, and lubricate it to see if the problem stops.
There is no speedometer cable to change. Subaru, like all modern cars, has an electronic speedometer. --Ken
There is no speedometer cable on a 1995 caravan. it is done by a speed sensor on the transmission and digtal data is sent to the computer and the computer then sends the signal to the speedometer. This is the case even when the speedometer looks analog. Likely a bad speedometer is the cause if it does not move as the speed sensor is used for other functions and would trip the "check engine" light if it was bad. the speedometer is part of the instrument cluster and likely you would need to change the whole thing.
It doesn't have a speedometer cable. It is electronic.
A 2000 Jeep does not have a speedometer cable.
how 2 change a 1999 speedo cable
To change the speedometer cable on a 1990 Toyota truck, disconnect the cable, feeding it through the grommet, then disconnect it from the transmission. The process can then be reversed with the new cable.
You will have to remove the instrument cluster to gain access. Clean the cable very good and then lubricate it with white grease.